National Instruments WSN-3226 User Manual And Specifications page 9

5
1 Retention Knob
2 Retention Clip
3 Mounting Hole
Refer to Figure 7 while completing the following steps to mount the NI WSN-3226 on a panel:
1. (NI WSN-3280)
(NI WSN-3281)
2. Slide the NI WSN-3226 device into the panel mount accessory as shown in Figure 7.
© National Instruments Corporation
1
2
3
4
5
4
5
Figure 7. Panel Mount Accessory
Bolt or screw the panel mount accessory to a panel using five 8-32 or M4 screws.
Attach the panel mount accessory using the integrated magnet.
Integrated Mounting Pin
Power and I/O Strain Relief
9 NI WSN-3226 User Guide and Specifications