Weider WESY13820 User Manual page 16

CONVERTING THE ARMS
To use the Arms (10, 11) as butterfly arms, remove
the Arm Pins (28) and engage the Arm Latch (29) into
the hole in the Press Frame (9).
To use the Arms (10, 11) as press arms, insert the
two Arm Pins (28) into the holes in the Press Frame
(9) and the Arms. Disengage the Arm Latch (29).
USING THE CURL PAD
To use the Curl Pad (18), attach the Curl Post (8) to
the Seat Frame (6) with the Curl Frame Knob (31).
Be sure the bracket on the Curl Post wraps
around the round tubes on the the Seat Frame.
ATTACHING THE LEG LEVER TO THE LOW
PULLEY STATION
To use the Leg Lever (7), the seat must be attached
to the front upright (see ATTACHING AND REMOV-
ING THE SEAT, on the previous page).
Attach the Low Cable (37) to the bracket on the Leg
Lever (7) with a Cable Clip (23).
28
31
37
16
29
11
9
10
18
8
Bracket
6
Round
Tube
Bracket
23
7