Weider WESY13820 User Manual page 10

15. Wrap the Arm Cable (36) around a Pulley (39).
Attach the Pulley to the Double "U"-Bracket (15)
with an M10 x 45mm Bolt (68) and an M10 Nylon
Locknut (56).
16. Wrap the Arm Cable (36) around a "V"-Pulley
(38). Attach the Pulley and a Long Cable Trap
(40) to a Pulley Bracket (30) with an M10 x 55mm
Bolt (69) and an M10 Nylon Locknut (56). Be
sure the Cable Trap is turned to hold the
Cable in the groove of the Pulley.
Attach the Pulley Bracket (30) to the bracket on
the Front Upright (4) with an M10 x 78mm Bolt
(71) and an M10 Nylon Locknut (56).
17. Slide the Arm Cable (36) onto the hook on the
Left Arm (11).
18. Locate the Short Cable (80). Attach the Cable to
the side of the Base (1) with an M10 x 70mm Bolt
(82), an M10 Washer (55), and an M10 Nylon
Locknut (56).
15
56
16
17
18
80
56
55
10
39
36
15
68
71
56
30
38
56
36
69
40
4
36
Hook
11
82
1