Riello ALUDOMUS SOLAR KV/200 20 ISC SOLAR User Manual page 13

Hide thumbs Also See for ALUDOMUS SOLAR KV/200 20 ISC SOLAR:

Table of Contents

o / l

Presence

If the rooms are not going to be used for some time, you

can press the presence key (7) to reduce room tempera-

ture and save energy. When you want to use the rooms

again, simply press the presence key again to restore

room temperature to the normal setpoint.

" o " Central heating set to comfort setpoint

" l " Central heating set to economy setpoint

The presence key only has any effect in automatic

mode. The selection remains active until the next

time the heating program is changed.

RESET function (parameter 6205)

The meters and parameter table RESET icon only appears

in the bottom line of the display if it is possible to per-

form a reset in the current user level (End user, Commis-

sioning, Heating engineer).

This operation must only be performed by the R .

Technical Assistance Service. Performing a RESET re-

stores all parameters to their default values, accor-

ding to the "Complete list of parameters".

To perform a reset , press the "OK" key (6) when the

"Yes" prompt flashes on the display.

n h

Special conditions

The following icons can be displayed under certain con-

ditions :

This symbol appears if a system error has occurred.

Press key (8) for further information .

This symbol appears if a maintenance alarm is

present or if the boiler has entered a special functioning

mode .

Press key (8) for further information.