Replacing The Camera; Procedure; Post-Requisites - Dell Inspiron 13 5000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Connect the camera cable to the camera module.
2. Adhere the tape that secures the camera cable to the camera module.
3. Using the alignment post place the camera module on the display panel and snap it into place.
Post-requisites
1. Follow the procedure from step 4 to step 6 in
2. Replace the display assembly.
3. Replace the battery.
4. Replace the base cover.

Replacing the camera

computer. After working inside your computer, follow the instructions in
"Replacing the display panel".
44
After
Replacing the camera 71