NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
Procedure
1. Disconnect the speaker cable from the system board.
2. Peel off the pieces of tape that secure the speaker cable to the palm-rest assembly.
3. Remove the speaker cable from the routing guides on the palm-rest assembly.
4. Note the position of the rubber grommets before lifting the speaker.
5. Remove the speakers from the alignment posts and lift the speakers off the palm-rest assembly.
Figure 14. Speakers
1. system board
3. palm-rest assembly
5. tape (3)
Removing the speakers
computer. After working inside your computer, follow the instructions in
2. speaker cable
4. routing guides
6. alignment posts
17
After
Removing the speakers
31