Removing The Power-Adapter Port; Prerequisites; Procedure - Dell Inspiron 13 5000 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•

Prerequisites

•

Procedure

Prerequisites
1. Remove the base cover.
2. Remove the battery.
3. Remove the wireless card.
4. Remove the display assembly.
Procedure
1. Disconnect the power-adapter port-cable from the system board.
2. Remove the screw (M2x3.5) that secures the power-adapter port to the palm-rest assembly.
3. Lift the power-adapter port off the palm-rest assembly.
Figure 26. Power-adapter port
1. power-adapter port-cable
3. power adapter port

Removing the power-adapter port

computer. After working inside your computer, follow the instructions in
2. screw (M2x3.5)
4. system board
Removing the power-adapter port
33
After
53