NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the
base
cover.
2. Remove the battery.
3. Remove the
display
assembly.
Procedure
1. Remove the display cable from the routing guides inside the hinge covers.
2. Using a plastic scribe, pry the display-panel assembly off the display back-cover and antenna assembly.
Figure 30. Display panel
1. plastic scribe
3. routing guides
5. hinge covers
3. Turn over the display-panel assembly.
Removing the display panel
computer. After working inside your computer, follow the instructions in
2. display back-cover
4. display cable
6. display panel
Removing the display panel
37
After
61