Step By Step Instructions; Install Flashwriter; Download The .All File; Make The Initial Connections - Digi Transport WR11 Manual

3 STEP BY STEP INSTRUCTIONS

3.1 Install FlashWriter

Install the latest version of FlashWriter from the following link:
http://ftp1.digi.com/support/firmware/FlashWriter.msi

3.2 Download the .ALL file:

Download the following zip file to your PC and extract all the contents to a single folder
http://ftp1.digi.com/support/firmware/transport/flashwriter/latest/wr11-flashwriter-x.x.x.x.zip
Click: http://ftp1.digi.com/support/firmware/transport/flashwriter/latest/
where X.X.X.X is the current firmware version.

3.3 Make the initial connections

1. Connect the WR11's Ethernet (LAN 0) port to your "office network".
2. Ensure the PC is also connected to the same "office network"
How to test a WR11 router step by step.
Page | 6