Digi Transport WR11 Manual page 16

How to test router step by step

Hide thumbs Also See for Transport WR11:

Table of Contents

How to test a WR11 router step by step.

Navigate to:

Management - Connections > PPP Connections > PPP 1

Wait for up to 5 minutes and check for a valid IP address

You may need to refresh the page for the new address to appear (click on >PPP 1)

If a valid IP address is NOT found, please download the debug.txt and email this to Digi Technical

Support (tech.support@digi.com) or open a case at

http://www.digi.com/support/eservice/

for

assistance.

Instructions on how to extract the debug.txt can be found in the following application note:

http://ftp1.digi.com/support/documentation/QN_024_Extracting%20the%20debug.txt%20file%20fro

m%20a%20Digi%20TransPort%20or%20Sarian%20router.pdf

Page | 16

Table of Contents

Need help?

Do you have a question about the Transport WR11 and is the answer not in the manual?