Part Identification Chart - Weider WEBE06690 User Manual

Part Identification Chart

This chart is provided to help you identify the small
parts used in assembly. Important: Some parts may
have been pre-assembled for shipping purposes.
If you cannot find a part in the parts bags, check
M8 x 50mm Bolt (44)Ð2
M8 x 55mm Bolt (25)Ð2
M8 x 40mm Bolt (27)Ð8
M6 x 16mm Screw (24)Ð2
M10 x 130mm Bolt (9)Ð1
M10 x 70mm Bolt (26)Ð5
M10 x 52mm Bolt (35)Ð1
to see if it has been pre-assembled. The number in
parenthesis below each part refers to the key number
of the part. The second number refers to the quantity
needed for assembly.
M8 Nylon Locknut (34)Ð6
5
M10 Nylon Locknut (30)Ð7
M10 Washer (29)Ð6
M8 Washer (17)Ð14