Toyota COROLLA VERSO ZZE121L Installation Manual page 19

6: P/S PUMP
PULLEY
5: TENSIONER
PULLEY
4: CRANKSHAFT PULLEY
2: TAPING
2: NOTE
1: COMPRESSOR DRIVE
BELT
4: FRONT
3: BOX-END COMBINATION
WRENCH (19mm)
4: FRONT
AC4488
1: ALTERNATOR
PULLEY
2: WATER PUMP
PULLEY
3: COMPRESSOR
PULLEY
AC4486
1: VEHICLE HARNESS (4-P)
3: FRONT
AC4489
(d) Use the following procedure to install the
compressor drive belt.
NOTE
Set the box-end combination wrench (19mm) as
shown in the left figure, and install the compressor
drive belt to the pulleys while pulling the box-end
combination wrench to the front of the vehicle.
(e) Install the compressor drive belt to the pulleys as
shown in the left figure.
(f) Pull the vehicle harness (4-P) down.
- 15 -
00500092