Qvlan Settings; Overview; Configuring The Qvlan Function - Tenda i9 User Manual

7.7 QVLAN Settings

7.7.1 Overview

The AP supports 802.1Q VLANs and is applicable in a network environment where 802.1Q VLANs
have been defined. By default, the QVLAN function is disabled.

7.7.2 Configuring the QVLAN function

Step 1 Choose Wireless > QVLAN Setup.
Step 2 Change the parameters as required. Generally, you only need to change the Enable, and
VLAN ID settings.
Step 3 Click Save.
*
--End
Parameter description
Parameter
Enable
PVID
Management VLAN
2.4G SSID
VLAN ID
*
Description
It specifies whether to enable the QVLAN function of the AP. By default, it is
disabled.
It specifies the ID of the default native VLAN of the trunk port of the AP. The
default value is 1.
It specifies the ID of the AP management VLAN. The default value is 1.
After changing the management VLAN, you can manage the AP only after
connecting your computer or AP controller to the new management VLAN.
It specifies the currently enabled 2.4 GHz SSIDs of the AP.
It specifies VLAN IDs corresponding to SSIDs. The default value is 1000.
After the QVLAN function is enabled, the wireless interfaces corresponding to
SSIDs functions as access ports. The PVID and VLAN ID of an access port are the
same.
68