Configuring Ap Mode - Tenda i9 User Manual

4.2 Configuring AP mode

The Mixed WPA/WPA2-PSK security mode and AES encryption algorithm are used as an example to
describe the configuration procedure. If you need to use another security mode, refer to Section
7.1 Basic settings.
Configuration procedure:
Step 1 Set Working Mode to AP.
Step 2 (Optional) Set SSID to a wireless network name.
Step 3 Set Security Mode to Mixed WPA/WPA2-PSK, Encryption Algorithm to AES, and Key to
the password of the wireless network.
Step 4 Click Save.
--End
Parameter description
Parameter
Working Mode
SSID
Security Mode
After the configuration, you can select the SSID on your wireless devices such as smart phones and
enter your wireless network password to connect to the wireless network of the AP and access the
internet through the AP.
Description
It specifies the working mode of the AP, including AP mode and Client+AP mode.
It specifies the primary SSID (wireless network name) of the wireless network at the
corresponding radio band.
It specifies the security mode of the wireless network, including: None, WEP, WPA-PSK,
WPA2-PSK, Mixed WPA/WPA2-PSK, WPA, and WPA2. Clicking the hyperlink navigates
you to the elaborated description of the corresponding security mode.
13