Access Control; Overview; Configuring Access Control - Tenda i9 User Manual

Table of Contents

7.6 Access Control

It specifies, based on MAC address filter rules, the wireless devices that can or cannot access the

wireless networks of the AP. Devices that have been controlled cannot connect to the

corresponding wireless network.

The AP supports the following MAC address filter rules:

Disable: It indicates that access control is disabled.

−

Allow: It indicates that only the wireless devices with the specified MAC addresses can

−

access the wireless networks of the AP.

Disallow: It indicates that only the wireless devices with the specified MAC addresses

−

cannot access the wireless networks of the AP.

Step 1

Choose Wireless > Access Control.

Step 2

From the SSID drop-down list box, select the SSID of the wireless network on which access

control must be implemented.

Step 3

Select an access control mode from the MAC Filter Mode drop-down list box.

Step 4

If you select Allow or Disallow, enter the MAC addresses to control in the access control

list and click Add.

If a wireless device to be controlled has been connected to the AP, you can click Add corresponding to

the device in the wireless client list to directly add it to the access control list.

Step 5

Click Save.

--End

Wireless access control list

Wireless client list

Table of Contents