Table of Contents
Advertisement
6.8
QVLAN Settings
6.8.1
Overview
The AP supports 802.1Q VLANs and is applicable in a network environment where 802.1Q VLANs
have been defined. By default, the QVLAN function is disabled.
If the QVLAN function is enabled, tagged data received by a port of the AP is forwarded to the
other ports of the VLAN corresponding to the VID in the data, whereas untagged data received by
a port of the AP is forwarded to the other ports of the VLAN corresponding to the PVID of the port
that receives the data.
The following table describes how ports of different link types process transmitted and received
data.
Method to Process Received Data
Port
Tagged Data
Access
Forward the data to other
ports of the VLAN
corresponding to the VID in
the data.
Trunk
6.8.2
Configure the QVLAN Function
Choose Wireless > QVLAN Settings.
Step 1
Enable QVLAN Settings.
Step 2
Change the parameters as required. Generally, you only need to change the 2.4 GHz SSID
Step 3
VLAN ID and 5 GHz SSID VLAN ID settings.
Click Save.
Step 4
Untagged Data
Forward the data to the
other ports of the VLAN
corresponding to the
PVID of the port that
receives the data.
69
Document version: V1.0
Method to Process
Transmitted Data
Transmit data after removing
tags from the data.
Transmit data without
removing tags from the data.
Advertisement
Table of Contents
