Tools; Firmware Upgrade - Tenda i9 User Manual

9

Tools

9.1 Firmware Upgrade

This function upgrades the firmware of the AP for more functions and higher stability.
To prevent damaging the AP, verify that the new firmware version is applicable to the AP before
upgrading the firmware and keep the power supply of the AP connected during an upgrade.
Configuration procedure:
Step 1 Download the package of a later firmware version for the AP from
to your local computer, and decompress the package.
Step 2 Log in to the web UI of the AP and choose Tools > Firmware Upgrade.
Step 3 Click Choose File and select the file for upgrading the firmware.
Step 4 Click Upgrade.
--End
Wait until the progress bar is complete. Log in to the web UI of the AP again. Choose Status >
System Status and check whether the upgrade is successful based on Firmware Version.
After the firmware is upgraded, you are recommended to restore the factory settings of the AP and
configure the AP again, so as to ensure stability of the AP and proper operation of new functions.
77
http://www.tendacn.com