Analog Devices AD9136/AD9135-EBZ Quick Start Manual page 6

e. The current on the 5V supply should read about 1430mA. If you do not see the output, gently push
the board toward the DPG3. This ensures that the board is firmly connected to the DPG3. The four
registers codeGrpSync, FrameSync, GoodCheckSum and Initial LaneSync should all read 0F indicating
the lanes are working correctly.
3. The output spectrum of the DAC should look like Figure 6 below.
Figure 6. AD9136/AD9135-EBZ Eval Board DAC output Spectrum
© Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
Rev 30 Sep 2014 21:07 | Page 6
www.analog.com
}}