Setting Up The Quantus™ Software (Optional) - Promega Quantus Fluorometer Operating Manual

3. Attach selected outlet adapter to the USB Power Supply. Make sure adapter is
securely attached to the power supply prior to operation.
Note: Use only the Outlet Adapter Kit suppled with the Quantus™
Fluorometer.
4. Plug the supplied USB Cord into the USB Power Supply.
5. Plug the mini USB end of the USB Cord into the back of the Quantus™
Fluorometer.
6. Plug the USB Power Supply into a wall outlet. Once plugged into the wall
outlet, the Quantus™ Fluorometer will power on.
7. To shut down the Quantus™ Fluorometer, unplug the instrument from the
power outlet or the computer to which it is connected.
2.B. Setting Up the Quantus™ Software (Optional)
The Quantus™ Fluorometer is designed to operate as a standalone instrument.
Connection to a computer with a Windows
required. However, the Quantus™ Fluorometer can be connected to a
computer to capture data.
Note: The computer captures data; it does not operate the instrument.
1. Download the Quantus™ Software located at:
www.promega.com/quantusfluorometersoftware/
2. Extract the contents of the downloaded file, and run setup.exe. Follow
prompts to install the software. If .NET 4.0 framework is not installed on the
computer, the software installer will prompt the user to download and install
the framework software (available for free from the Microsoft web site).
3. Once the Quantus™ Software is installed, connect the Quantus™
Fluorometer to the computer. When the "Found New Hardware" wizard
appears on the screen, select "Install Automatically" and then "Continue
Anyway". This will install the Quantus™ Fluorometer driver on the
computer. Driver installation must be performed only once for each USB
port on the computer used to connect to the Quantus™ Fluorometer. A
green indicator light will appear in the bottom right corner of each
Quantus™ Fluorometer screen when the instrument is connected to the
computer.
Note: To verify that the driver was installed, check the computer Device
Manager. Search for the Device Manager location on your computer.
Expand "Ports". "Quantus™ Serial Device" should be listed. Contact
Promega Technical Services if you need assistance.
Promega Corporation · 2800 Woods Hollow Road · Madison, WI 53711-5399 USA
Toll Free in USA 800-356-9526 · Phone 608-274-4330 · Fax 608-277-2516 · www.promega.com
Printed in USA.
Revised 1/20
® 7 or 8 operating system is not
Part# TM396
Page 7