5. Scan
Entering the Path to the Destination Manually
When Using the Scanner Application
About how to use the application's screen, see page 46 "[Scanner] Screen".
When Using the Scanner (Classic) Application
1.
Press [Manual Entry].
2.
Make sure that [SMB] is selected.
3.
Press [Manual Entry] on the right side of the path field.
4.
Enter the path for the folder.
In the following example path, the shared folder name is "user" and the computer name is
"desk01":
\\desk01\user
5.
Press [OK].
6.
Depending on the destination setting, enter the user name for logging in to the
computer.
Press [Manual Entry] to the right of the user name field to display the soft keyboard.
7.
Press [OK].
8.
Depending on the destination setting, enter the password for logging in to the
computer.
Press [Manual Entry] for the password to display the soft keyboard.
120