Adjustment - Ricoh MP CW2201 User Manual

• For details about printing the test pattern, see page 229 "Print Nozzle Check Pattern".

Adjustment

Auto Adjust Head Position
If bidirectional printing produces misaligned verticals or blurred colors, printing the test pattern will re-
calibrate the machine. The test pattern differs depending on the print quality.
• Printing the test pattern consumes ink. Perform this function only when necessary.
• Adjustment results vary depending on the Prevent Paper Abrasion mode's status. If you perform an
adjustment while Prevent Paper Abrasion mode is enabled and do not want to print using this
mode, cancel Prevent Paper Abrasion mode, and then perform the adjustment again.
• Perform no other operations while the test pattern is printing.
• An error will occur and test patterns will not print if:
• There is a misfeed.
• One of the machine's covers is open.
• The machine is performing maintenance operations.
• The machine has run out of ink.
• The machine has run out of paper.
• An adjustment sensor failure occurred while performing an adjustment.
1. Press [Home] ( ) at the bottom of the screen in the center.
2. Flick the screen to the left, and then press the [User Tools] icon ( ).
3. Press [Machine Features].
4. Press [Maintenance].
5. Press [Auto Adjust Head Position].
6. Select the items of the head position you want to adjust, and then press [Adjustment].
Adjusting the Print Quality
233