Table of Contents
Advertisement
J4
(NOTE 4)
J6
(NOTE 4)
J 7
(NOTE 4)
J 8
(NOTE 1)
NOTES:
1 .
Select the Gun 1 (P2) I/O port mode by setting both the Jl and J8 jumpers to input or output mode.
2.
Select the Gun 2 (P4) I/O port mode by setting both the J3 and J5 jumpers to input or output mode.
3 .
Set the Video Sync Signal Polarity to Positive by setting the J2 jumper on pin 1 only. Do not remove.
4 . These jumpers are not required for this game. They may not be present on the board assembly.
NOTICE: The manufacturer wants you to know that guns are not supplied
Connectors are provided for other games that do have guns. We regret your disappointment.
SOUND i/O BOARD ASSEMBLY
JUMPER POSITION CHART
BETWEEN
GUN 2 I/O
CONNECTOR
NONE
NONE
NONE
NONE
BETWEEN
GUN 1 I/O
P4 & u9
CONNECTOR
INPUT
MODE
P 4
OUTPUT
MODE
NOT USED
NOT USED
INPUT
MODE
P 2
OUTPUT
MODE
6-8
PINS 1 & 2
PINS 2 & 3
NONE
NONE
PINS 1 & 2
PINS 2 & 3
with this game.
8
Advertisement
Table of Contents
