Table of Contents
Advertisement
CABINET ARRA'?
Multiple cabinets should be attached together to form a game array. Each cabinet comes with its own
mounting hardware to mechanically connect the cabinets. See the following pages for linking instructions.
Install the cabinet casters, leg levelers, seat pedestal, etc., as described on previous pages. Place
the completed cabinets next to each other, leaving sufficient space to remove and install bolts.
Unlock and remove the rear cabinet door. Remove three flat head carriage bolts on the inner
sides of each cabinet, two along the rear of the adjacent sides, and one at the top center of the
side. Retain three of the flange grip nuts. Place the six bolts and the remaining three nuts in the
spare parts bag. Locate three longer carriage bolts from the spare parts.
Move the cabinets next to one another. Adjust levelers until the sides are parallel and touching
each other. Align the holes. Insert the long bolts through both cabinets. Install nuts and tighten.
Repeat these steps for additional cabinets. Install and lock the rear doors.
INNER CABINET SI
BOLTS AND NUTS
CNCOOOO I
BOLTING CABINETS TOGETHER TO FORM AN ARRAY
INSERT BOLTS THROUGH
BOTH
CABINETS
Advertisement
Table of Contents
