Advertisement
8 en |
The 12 V mode can be configured using one or two batteries.
For a one-battery installation, refer to Figure 5.1, and perform
the following procedure:
1.
2.
3.
For the two-battery installation, refer to Figure 5.2, and perform
the following procedure:
1.
2.
3.
NOTE!
To switch the power supply between 12 V or 24 V modes, dis-
connect the input voltage and set the switch as shown in the
figure below.
i
F.01U.024.980 | V.2 | 2006.08
Connect B1 to the power supply position labbeled BAT.
Connect B2a (black) to the battery's
(red) to the battery's
Connectors B3a and B3b remain unused - fix them with the
bracket J.
Connect B1 to the power supply position labbeled BAT.
Connect B2a (black) to the battery's
(red) to the battery's
Connect B3a (black) to the second battery's
and B3b (red) to the second battery's
Assembly Instruction
-
+
terminal.
-
+
terminal.
AMC UL1 Housing
terminal, and B2b
terminal, and B2b
-
terminal,
+
terminal.
Bosch Security Systems
Advertisement
