Advertisement
Installation – Wall-Mount (continued)
3
Hanging the fireplace
□ Due to the many different materials used on different
walls, it is highly recommended that you consult your local
builder before you install this appliance on the wall.
□ A. Select a location that is not prone to moisture and is
located at least 36 in. (914 mm) away from combustible
materials such as curtain drapes, furniture, bedding, paper,
etc.
□ B. Have two people hold the appliance against the wall to
determine the final location.
□ C. Place unit face down on a soft, non-abrasive surface.
Remove the bracket (B) from the back of the unit by
removing the screws.
□ D. Mark out location, then mount the bracket (B) onto the
wall using the supplied screws. This bracket MUST have
the hooks facing upward and be level.
NOTE: It is strongly recommended that the mounting
bracket be screwed into the wall studs where possible. If
the wall studs cannot be used, ensure that the supplied
plastic anchors are used to affix the bracket to the wall and
the bracket is adequately secured.
Hook
□ E. With the wall mounting bracket installed have two
people lift the appliance up and insert the two hooks on the
bracket into the two slots on the back of the appliance.
□ F. Check the appliance for stability ensuring that the
bracket will not pull free from the wall.
Drywall
Hook
BB
BB
BB
8
B
BB
BB
BB
AA
AA
AA
AA
AA
m
i m u
AA AA
M i n
.
7 i n
1 9 .
)
c m
( 5 0
a
Hide quick links:
Advertisement
