Advertisement
Installation – Wall-Mount
1
Find a safe location
□ Minimum clearance on each side: 19.7 in. (50 cm).
□ Minimum clearance below: 19.7 in. (50 cm).
□ Minimum clearance above: 39.4 in. (100 cm).
□ Minimum clearance from the front and sides: 3 ft. (90 cm).
□ Choose a location near an outlet so an extension cord is
not required.
□ DO NOT position the unit directly below a power outlet.
□ See Safety Information on pages 2 and 3 for warnings
about safe placement, safe installation, and proper use of
this product.
NOTE: The wall mount fasteners included with this
fireplace are for use ONLY with a wood-framed wall covered
in drywall (sheet rock). For concrete walls, cinder blocks,
or other wall types, consult a professional for the best
attachment methods.
WARNING: ALWAYS unplug this fireplace heater before
assembly or cleaning, or before relocating. Failure to do so
could result in electric shock, fire, or personal injury.
Minimum 39.4 in. (100 cm)
19.7 in.
(50 cm)
19.7 in.
(50 cm)
Minimum 19.7 in. (50 cm)
2
Preparing the installation location
□ A. Locate the wall studs using an electronic stud-finder.
Mark the hole locations with a pencil. The holes should be
8 in. (20.3 cm) apart, and level. The minimum height from
the surface below must be 19.7 in. (50 cm).
□ B. Three screws (AA) should be screwed directly into wall
studs. Then, four drywall anchors (BB) are needed.
CAUTION: AVOID INJURY and DAMAGE! Three screws should
be screwed directly into wall studs and additional screws must
also be screwed into the drywall anchors.
7
Please contact 1-855-HD-HAMPTON for further assistance.
Drywall
Studs
BB
BB
BB
BB
BB
HAMPTONBAY.COM
Hide quick links:
Advertisement
