HAMPTON BAY BEF-48TSC Use And Care Manual page 9

Installation – Metal Base
1
Preparing the fireplace
□ Take out the fireplace and parts and place the fireplace on
a flat and soft surface.
NOTE: This must be done by at least 2 people. Ensure the
power is off before you begin.
2
Install the metal base,
then fix the screws
9
2
Attaching the metal base
□ Attach the metal bases (D) to the bottom of the fireplace
using the ST4x12 metal screws. Tighten securely using a
Philips screwdriver.
D
Take off the screws
on the bottom plate
Please contact 1-855-HD-HAMPTON for further assistance.
1
HAMPTONBAY.COM