Part Identification Chart - Weider 140 User Manual

PART IDENTIFICATION CHART

This chart is provided to help you identify the small parts used in assembly. The number in parenthesis below
each part refers to the key number of the part from the PART LIST in the center of this manual. Important:
Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in the parts
bags, check to see if it has been pre-assembled.
M10 x 135 mm Bolt (36)
M10 x 115mm Bolt (19)
M10 x 60mm Bolt (32)
M8 x 55mm Bolt (18)
M8 x 40mm Carraige Bolt (41)
M8 x 40mm Bolt (39)
M6 x 38mm Screw (30)
M6 x 16mm Screw (29)
M8 Nylon Locknut (17)
M6 Washer (26)
M8 Washer (16)
M10 Washer (34)
M10 Nylon Locknut (33)