ATTACHING THE CURL PAD
37
For some exercises, the Curl Pad (37) needs to be
attached to the weight bench. To do this, remove the
22
30mm Square Inner Cap (22) from the Front Leg (8).
Insert the Curl Post (38) into the Front Leg and align
38
an adjustment hole in the Curl Post with the adjust-
ment hole in the Front Leg. Secure the Curl Post with
Hole
the Adjustment Knob (31).
Note: When the Curl Pad (37) is not being used, it
Adjustment
should be stored away from the weight bench,
Hole
and the 30mm Square Inner Cap (22) should be
8
inserted into the Front Leg (8).
31
10