Approved Kombitools; Mounting The Loop Handle - Stihl KM 111 R Instruction Manual

Approved KombiTools

The following STIHL KombiTools may
be mounted on the KombiMotor:
KombiTool Application
FS-KM Brushcutter with
mowing head
1)
FS-KM Brushcutter with
grass cutting blade
1)
RG-KM Weeder
HL-KM 145° Long reach hedge
trimmer, adjustable
HL-KM 0° Long reach hedge
trimmer
FH-KM 145° Power scythe
BG-KM Blower
HT-KM Pole pruner
BF-KM Cultivator
FBD-KM Redefining bed
edges
FCB-KM Lawn edging
FCS-KM Lawn edging
KB-KM Bristle brush
KW-KM PowerSweep
1)
the barrier bar supplied with the
machine must be used – see also

"Mounting the Loop Handle"

KM 111 R, KM 131 R
Mounting the Loop Handle
A barrier bar is supplied with the
machine. Attach the barrier bar to the
loop handle.
2
1
Insert square nuts (1) in the barrier
N
bar (2) – the holes must line up
4
5
6
1
Insert the clamp (3) in the loop
N
handle (4) and position them
together on the shaft (5)
Position clamp (6)
N
Position barrier bar (2) – note
N
position!
Line up the holes
N
Insert bolts (7) in the holes – and
N
screw them into the barrier bar as
far as possible
English
2
3
7
11