AJAX FireProtect User Manual page 12

1. Fix the SmartBracket panel on the ceiling using bundled screws. If you use
any other attachment tools, make sure that they do not damage or deform
the attachment panel.
Use double-side adhesive tape only for temporary attachment of the detector. The
tape runs dry with time, which can cause falling, false triggering, and detector
malfunction.
2. Put the detector on the attachment panel by turning it clockwise on
SmartBracket. When the detector is xed in SmartBracket, it blinks with LED,
signaling that the tamper is closed.
If LED doesn't blink after xing in SmartBracket, check the status of the tamper
in the Ajax app and then the xing tightness of the panel.
If someone detaches the detector from the surface or takes it off the
attachment panel, the security system noti es you.
Do not install the detector:
1. outside the premises (outdoors);
2. nearby any metal objects or mirrors causing attenuation or screening of the
signal;
3. at any places with fast air circulation (air fans, open windows or doors);
4. closer than a meter to the cooking surface;