E008-0001: Pressure Belt Unit Service Life Detection Error - Canon imagePRESS C800 Series Technical Workbook

T E C H N I C A L W O R K B O O K

E008-0001: Pressure Belt Unit Service Life Detection Error

An E008-0001 Error Code occurs when the amount of current for the Fixing Motor (M48) has reached a precise
specified value due to increased torque on the Pressure Belt. Most of the cases are attributed to the deficiency of
the Lubricant inside the Pressure Belt. In most cases when the symptom has occurred, the Fixing Belt Unit is
often still usable. CUSA recommends replacement of the Pressure Belt Unit only. Do not to replace the Fixing
Belt Unit at this time. Inspect the Fixing Belt Unit Gear area [1], the Pressure Belt Unit Gear area [2] and the
Fixing Drive Gear area [3], and if no damage is found, then only replace the Pressure Belt Unit.
[2]
[1]
[3]
Perform the subsequent steps in order to ensure that the E008-0001 Error Code does not occur any more after
each of the steps.
1) Inspect if the Current Value in Service Mode Level2: COPIER> DISPLAY> FIXING> FX-MTR5).
18