Canon imagePRESS C800 Series Technical Workbook page 12

T E C H N I C A L W O R K B O O K
Fit the Post [B] of the Fixing Belt Unit into the Plastic U-Shaped Hole [D] of the Hook. The Post [E] on

the Fixing Belt Unit should insert into the Hole [F].
[B]
3) Place the Fixing Belt Displacement Control Motor Unit over the Boss on the Fixing Belt Unit and secure
them with a New Screw. Be sure that the Metal Plate [A] of the Fixing Belt Unit does not rest on top of the
Boss [B] on the Fixing Belt Displacement Control Motor Unit.
IMPORTANT!
When attaching the Fixing Belt Displacement Control Motor Unit to the Fixing Belt Unit,
always use a New Screw. The Screw used to attach the Fixing Belt Displacement Control Motor
Unit should not be reused once it is removed!
[A]
[D]
6
[F]
[E]
[B]