Advertisement
Available languages
Available languages
EN
User Manual
s
afety
Do not exceed the maximum allowed inward
•
ranges.
Do not measure voltage in resistance
•
measuring function.
Set the function switch to „OFF" if you do not
•
use the device.
Set the function switch to the correct position
•
before measuring with the device.
When measuring voltage (V) do not set the
•
device to current / resistance mode.
If you want to switch the measuring range,
•
use the function switch but always remove the
wires first.
Do not exceed the maximum allowed inward
•
thresholds.
w
arning
Improper use of the device may lead to injury,
damage and even death. Read the manual
carefully before using the device. Always
remove the wires from the device before
replacing the battery. Verify the intactness
of the wires and the device before usage.
Replace all faulty parts or have them repaired
before using the device. Be very careful when
measuring above 25VAC RMS or 35VDC as these
voltages may cause serious injury. When storing
the device for a longer time period remove
the battery. Always discharge capacitors and
make sure the circuit is not under power when
measuring diode, resistance or continuity.
Voltage measuring may be difficult and
•
misleading due to uncertainty of the
connection. Other methods should be used to
determine whether the connection is right.
Safety functions of the device are only
•
effective if the device is used as prescribed by
the manufacturer.
Function
DC+AC Watt
A AC,A DC
V DC, V AC
Max. inward value
240kW
1000A
600V DC/AC
Function
Resistance,
diode, continuity,
frequency, duty
cycle measurement
s
etUp
1
2
A
3
A
4
Hz%
5
DC
A C
6
7
1. Clamps
2. Trigger
3. Data hold and backlight button
4. Function selection switch
5. Hz / % function
6. LCD display
7. COM connector
8. Rotating function switch
9. ZERO button
10. Measuring range button
11. V, Ω, Cap, W, Hz connector
12. Battery holder
s
pecifications
Function
Range
DC current
1000 A DC
AC current
1000 A AC
Max. inward value
250V DC/AC
8
9
10
MC-25 624
A
K W
11
+
12
Accuracy(% read
value)
± (1.8% + 5 digit)
± (2.0% + 5 digit)
Advertisement
