Steelcase Norfolk II Modular Credenzas Manual

®
Modular credenza components are
shipped separately for field assembly
and require the following:
- Worksurface that spans the
collective length of the selected
storage components
- Storage components
- Base
If you have a problem, question, or request, call
your local dealer, or Steelcase Line 1 at
888.STEELCASE (888.783.3522)
for immediate action by people who want to help you.
(Outside the U.S.A., Canada, Mexico, Puerto Rico,
and the U.S. Virgin Islands, call: 1.616.247.2500)
Or visit our website: www.steelcase.com
© 2004 Steelcase Inc.
Grand Rapids, MI 49501
U.S.A.
Printed in U.S.A.
Use straight end
panels to create a knee-
space with a modesty
panel.
Use L-end panels to
create a kneespace
without modesty panel.
Use center support
panel together with a mod-
esty panel for kneespaces
48" or greater.
Use T-support panel for
kneespaces 48" or greater
without a modesty panel.
Norfolk II - Modular Credenzas
Modular credenzas
can also be built with knee-
spaces. Use an end panel
when a kneespace is
desired at the end of the
credenza.
Modesty panels can
finish the open area of a
kneespace.
29 5 ⁄ " modesty panel
8
should be used to span
between two storage
components.
11" support panel should be
used with a modesty panel to
support a kneespace 48" or greater.
Phillips Tip
1/8" Drill Bit
Page 1 of 5
939500089 Rev B