Summary of Contents for Steelcase Avenir Stack-On Frames
Page 1
® Avenir Stack-On Frames If you have a problem, question, or request, call your local dealer, or Steelcase Line 1 at 888.STEELCASE (888.783.3522) for immediate action by people who want to help you. (Outside the U.S.A., Canada, Mexico, Puerto Rico, and the U.S.
Page 2
Installing a Stack-on TOP CAP REVEAL Frame Remove top cap and save for future use. TOP CAP Remove screws from top cap reveal and SAVE screws for the next step. Remove top cap reveal. EXISTING AVENIR PANEL Page 2 of 6 939500705 Rev F...
Page 3
FOR WOOD TOP CAPS : Use of a standard connector will result in the top cap not seating fully. Connecting bracket with countersunk CONNECTOR BRACKET holes installed under wood top cap, must be moved to top of stack-on frame. Replace with standard connector bracket supplied with stack-on frame.
Page 4
Installing a Stack-on Frame (Continued) NOTE: Because of the weight of the stack-on frame, you may 1/4-20 NUT need more than one person to WASHER perform this step. TOP CAP REVEAL Align tops of bayonets with the slots in the bottom of the stacker and slide downward until an audible click is heard (4a).
Page 5
Removing a Stack-on Frame from an Avenir Panel Remove top cap. Pry top of lock bracket upward (on both sides) to release the stack-on frame from the bayonet brackets. Page 5 of 6 939500705 Rev F...
Page 6
Removing a Stack-on Frame from an Avenir Panel (Continued) NOTE: Because of the weight of the stack-on frame, you may need more than one person to perform this step. Lift stack-on frame upward to remove. Page 6 of 6 939500705 Rev F...
Need help?
Do you have a question about the Avenir Stack-On Frames and is the answer not in the manual?
Questions and answers