Functional Description - Makita DHP484 Instruction Manual

FUNCTIONAL
DESCRIPTION
CAUTION:
Always be sure that the tool is
switched off and the battery cartridge is removed
before adjusting or checking function on the tool.
Installing or removing battery
cartridge
CAUTION:
Always switch off the tool before
installing or removing of the battery cartridge.
CAUTION:
Hold the tool and the battery car-
cartridge.
Fig.1: 1. Red indicator 2. Button 3. Battery cartridge
it into place. Insert it all the way until it locks in place
CAUTION:
Always install the battery cartridge
fully until the red indicator cannot be seen.
you or someone around you.
CAUTION:
Do not install the battery cartridge
forcibly.
Indicating the remaining battery
capacity
Only for battery cartridges with "B" at the end of the
model number
Fig.2: 1. Indicator lamps 2.
Indicator lamps
Lighted Off
Overload protection
automatically stops without any indication. In this sit-
tool on to restart.
Overheat protection
Overdischarge protection
-
Switch action
Remaining
capacity
Blinking
75% to 100%
50% to 75%
trigger. Release the switch trigger to stop.
25% to 50%
0% to 25%
6 ENGLISH
Indicator lamps
Lighted Off Blinking
NOTE:
NOTE:
Fig.3: 1. Star marking
Fig.4: 1. Switch trigger
CAUTION:
Before installing the battery car-
tridge into the tool, always check to see that the
switch trigger actuates properly and returns to
the "OFF" position when released.
NOTE:
Remaining
capacity
Charge the
may have
-
-
-