Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DHP484SFE
Summary of Contents for Makita DHP484SFE
- Page 1 INSTRUCTION MANUAL Cordless Hammer Driver Drill DHP484 Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DHP484 Drilling capacities Masonry 13 mm Steel 13 mm Wood 38 mm Fastening capacities Wood screw 10 mm x 90 mm Machine screw No load speed High (2) 0 - 2,000 min Low (1) 0 - 500 min Blows per minute High (2) 0 - 30,000 min... -
Page 3: General Power Tool Safety Warnings
Prevent unintentional starting. Ensure the SAFETY WARNINGS switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. Carrying power tools with General power tool safety warnings that have the switch on invites accidents. WARNING: Remove any adjusting key or wrench before Read all safety warnings and... - Page 4 Take caution to prevent dust inhala- tion and skin contact. Follow material supplier also void the Makita warranty for the Makita tool and safety data. charger. SAVE THESE INSTRUCTIONS.
-
Page 5: Functional Description
Never recharge a fully charged battery car- Indicating the remaining battery tridge. Overcharging shortens the battery capacity service life. Charge the battery cartridge with room tem- Only for battery cartridges with "B" at the end of the perature at 10 °C - 40 °C (50 °F - 104 °F). Let model number a hot battery cartridge cool down before charging it. - Page 6 Overheat protection Lighting up the front lamp before turning the tool on again. Overdischarge protection When the battery capacity is not enough, the tool stops automatically. In this case, remove the battery from the tool and charge the battery. NOTE: Overheat protection (for battery) will work only with batteries with star marking.
-
Page 7: Speed Change
If the tool speed is coming down extremely during the of rotation. Depress the reversing switch lever from the and restart the operation. terclockwise rotation. Selecting the action mode When the reversing switch lever is in the neutral posi- tion, the switch trigger cannot be pulled. CAUTION: Always set the ring correctly to Speed change... -
Page 8: Installing Hook
arrow on the tool body. You can get the minimum fas- Before actual operation, drive a trial screw into your material or a piece of duplicate material to determine tionship between the screw size and graduation. Graduation Machine screw Wood Soft wood –... -
Page 9: Operation
Installing driver bit holder Screwdriving operation Optional accessory CAUTION: Adjust the adjusting ring to the proper torque level for your work. CAUTION: Make sure that the driver bit is inserted straight in the screw head, or the screw and/or driver bit may be damaged. First, turn the action mode changing ring so that the arrow on the tool body points to the marking. -
Page 10: Optional Accessories
CAUTION: These accessories or attachments Drilling in wood are recommended for use with your Makita tool When drilling in wood, the best results are obtained accessories or attachments might present a risk of screw makes drilling easier by pulling the drill bit into for its stated purpose. -
Page 12: M Ak I T A C Or Por At I On
J an- B apt i s t Vi nk s t r aat 2, M ak i t a E ur ope N . V. 3070 K or t enber g, B el gi um 3- 11- 8, S um i y os hi - c ho, M ak i t a C or por at i on A nj o, A i c hi 446- 8502 J apan 885509-227...