TP-Link TL-WPA8631P User Manual page 36

Chapter 3
3. Click Backup to save a copy of the current settings to your local computer. A
bin file will be stored to your computer.
• To restore configuration settings:
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the password you set for the extender.
2. Go to System Tools
3. Click Browse to locate the backup configuration file stored on your computer, and
click Restore. The configuration file is config.bin.
4. Wait a few minutes for the restoring and rebooting.
Note: During the restoring process, do not turn off or reset the extender.
• To reset the extender to factory default settings:
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the password you set for the extender.
2. Go to System Tools
3. Click Factory Restore
4. Wait a few minutes for the resetting and rebooting.
Note:
1. During the resetting process, do not turn off the extender.
2. We strongly recommend you back up the current configuration settings before resetting the extender.
> Backup & Restore page.
> Backup & Restore page.
to reset the extender.
Configuring via Web Management Interface
config.
33