Quick Installation Guide
TL-WPA8631P KIT
* TL-WPA8631P KIT (European version) is used for demonstration in this QIG.
* Images may differ from actual products.
e
r l i n
w e
P o
LAN
WAN
Router
Extender
TL-WPA8631P
1
Plug the adapter into a power outlet
Adapter
TL-PA8010P
and connect it to the router's LAN
port via an Ethernet cable.
2
Plug in the extender into a power outlet on the same service panel.
Wait until the extender's Powerline LED
Note:
1. If only one wall outlet is available, plug both devices into a power strip for setup, then
relocate to wall outlets before enjoying the internet.
2. If the extender's Powerline LED
Powerline Network by Pairing on the back page to pair the powerline devices.
3
On
Connect your devices to the internet using the default SSIDs (network names)
and password on the label at the side of the extender.
Attention
1. Use the product only in the upright direction.
2. Plug powerline devices into wall outlets instead of power strips.
Using power strip will affect network performance or even cause connection drops.
Wall Outlet
turns on.
is off, try another wall socket, or refer to Create a Secure
SSID:TP-Link_XXXX
SSID:TP-Link_XXXX_5G
Wireless Password:XXXXXXXX
Tips:
Want to unify Wi-Fi networks or personalize your networks?
See the back page for instructions.
Power Strip