Chapter 3
device's MAC address.
For example,
I have a computer that is connected to my wireless network. Now, an
unknown device (an intruder) is also using my wireless network, which affects my
internet speed. I would like to control my wireless network with the following capabilities:
• My computer is always allowed to access the wireless network.
• The unknown device is not allowed to access the wireless network.
• I don't have to keep changing my wireless password as often.
How can I do that?
1. Connect to the powerline extender wirelessly. Visit http://tplinkplc.net, and log in with
the password you set for the extender.
2. Go to Wireless>
MAC
3. Toggle
On
to enable MAC Filter. If you are prompted like the following picture, click
Continue.
4. Select either of the filtering rules and click Save. Here we select
from the devices listed below
5. Click
Add
under Device List to add devices to the list.
Filter.
and then click Save.
Configuring via Web Management Interface
Block wireless access
29