To Extend The Existing Wireless Network - TP-Link TL-WPA8631P User Manual

Chapter 2
2 2

To Extend the Existing Wireless Network

I want to:
Extend the existing wireless network by adding a new powerline extender into the
existing powerline network.
For example, I already set up a wireless network using powerline devices, but the
wireless network is still not big enough to reach the top floor. So I bought a new powerline
extender to extend the wireless network.
How can I do that?
1. Plug the new powerline extender into a wall socket near one of the existing powerline
extender.
2. Check the new extender's Powerline LED
• If it is on, follow Step
• If it is off, follow Step
3. Join the new powerline extender into the existing powerline network by pairing two
powerline devices.
a . Press the Pair button on the existing powerline device for 1 second. The Power
LED should start blinking.
Note: If the Power LED does not blink, press again.
b . Within two minutes, press the Pair button on the new powerline extender for 1
second. The Power LED should start blinking. When the Powerline LED turns on,
the pairing process is complete.
P o
Existing Powerline Device
(For demonstration only)
4 > A.
3 and Step 4 > B.
e
r l i n
w e
New Powerline Extender
TL-WPA8631P
. Is it on?
Initial Use
11