Driving Motor (Dc Motor) - ELNA Elnita ec 30 Service Manual

REPLACING THE ELECTRONIC COMPONENTS

DRIVING MOTOR (DC MOTOR)

TO REMOVE:
1. Remove the front cover. (Refer to page 6.)
2. Remove the setscrews (2 pcs.) and the driving motor and the belt.
TO ATTACH:
3. Install the driving motor and the motor belt. Tighten them with setscrews (2 pcs.) lightly.
4. Move the motor up or down to adjust the motor belt tension.
The belt should deflect 7 to 9 mm when applying 300 grams-force of load to the middle of the belt.
Tighten the setscrews (2 pcs.) firmly.
5. Attach the front cover.
Setscrew
Setscrew
Belt
300 gf pressure
7 to 9 mm
26
DC motor (unit)