Step 1; Step 2 - modway MOD-6148 Manual

MOD-6148/ 6149/ 6150/ 6151/ 6152/ 6153/ 6154/ 6155/ 6156/ 6157/ 6158/
6159/ 6160/6161/ 6162/ 6163/6164/ 6165/ 6166/6167 HEADBOARD

STEP 1:

1. Line up the Headboard (1) board's pre-drilled holes to match those of the Bed Frame (2).
2. Secure the Headboard (1) to the Bed Frame (2) by using 2 pieces of Bolts (B) for the thicker
Bed Frame (2), and 2 pieces of Bolts (A) for the thinner Bed Frame (2).
3. Attach the Headboard (1) to the Bed Frame (2) by using 2 pieces of Bolts (B) with 2 pieces of Spring
Washers (D) and 2 pieces of Flat Washers (C) for the thicker Bed Frame (2) as shown.
4. Repeat the same procedure for each bolt and each side of the Bed Frame (2).
5. Use Allen Wrench (E) to tighten all Bolts (A or B) clockwise as shown.

STEP 2:

Carefully position the assembled bed to the desired location by four adults.
NOTE: Hardware may loosen over time. Periodically check that all connections are tight.
Customer Service 609-256-9000︱www.modway.com
Assembly is completed. The bed is ready to use now!
Page 6 of 6