Step 1; Step 2 - modway MOD-6148 Manual

MOD-6148/ 6149/ 6150/ 6151/ 6152/ 6153/ 6154/ 6155/ 6156/ 6157/ 6158/
6159/ 6160/6161/ 6162/ 6163/6164/ 6165/ 6166/6167 HEADBOARD

STEP 1:

1. Line up the Bed Frame (2) board's pre-drilled holes to match those of the Headboard (1).
2. Secure the Headboard (1) to the Bed Frame (2) by using 2 pieces of Bolts (B) for the thicker
Bed Frame (2), and 2 pieces of Bolts (A) for the thinner Bed Frame (2).
3. Before inserting each bolt, place 1 piece of Spring Washer (D) and Flat Washer (C) on each bolt. Then
fit 1 piece of Flat Washer (C) and Nut (E) on the bolt as it protrudes through the Bed Frame (2) and the
Headboard (1) as shown.
4. Repeat the same procedure for each bolt and each side of the Bed Frame (2).
5. Use Allen Wrench (F) and Spanner Wrench (G) to tighten all Bolts (A or B) and Nut (E)
clockwise as shown.

STEP 2:

Carefully position the assembled bed to the desired location by four adults.
NOTE: Hardware may loosen over time. Periodically check that all connections are tight.
Customer Service 609-256-9000︱www.modway.com
Assembly is completed. The bed is ready to use now!
Page 4 of 6