Weber 42372 Owner's Manual
  1. Manuals
  2. Brands
  3. Weber Manuals
  4. Grill
  5. 42372
  6. Owner's manual

Weber 42372 Owner's Manual

Built-in lp gas grill
Hide thumbs
Table of Contents

Advertisement

Quick Links

SUMMIT
BUILT-IN LP GAS GRILL OWNER'S GUIDE
YOU MUST READ THIS OWNERS GUIDE
BEFORE OPERATING YOUR GAS GRILL
DANGER
If you smell gas:
1. Shut off gas to the appliance.
2. Extinguish any open fl ames.
3. Open lid.
4. If odor continues, keep away from the
appliance and immediately call your gas
supplier or your fi re department.
Leaking gas may cause a fi re or explosion
which can cause serious bodily injury or
death, or damage to property.
WARNING
1. Do not store or use gasoline or other
fl ammable liquids or vapors in the vicinity
of this or any other appliance .
2. An LP cylinder not connected for use
shall not be stored in the vicinity of this
or any other appliance.
®
PLATINUM D4 & D6
NOTICE TO INSTALLER: These instructions
must be left with the owner and the owner
should keep them for future use.
THIS GAS APPLIANCE IS DESIGNED FOR
OUTDOOR USE ONLY.
#
WARNING: Follow all leak-check
procedures carefully in this manual prior
to barbecue operation. Do this even if the
barbecue was dealer-assembled.
WARNING: Do not try to light this
appliance without reading the "Lighting
Instructions" section of this manual.
42372
42372 US 10/03/05
LP
US English

Advertisement

Table of Contents
loading

Related Manuals for Weber 42372

Summary of Contents for Weber 42372

  • Page 1 THIS GAS APPLIANCE IS DESIGNED FOR OUTDOOR USE ONLY. WARNING: Do not try to light this appliance without reading the “Lighting Instructions” section of this manual. 42372 42372 US 10/03/05 US English...
  • Page 2 Do not use a fl ame to check for gas leaks. Combustible materials should never be within 24 inches of the back or sides of your Weber Do not put a barbecue cover or anything fl ammable on, or in the storage area under the barbecue.

  • Page 3: Warranty

    STORAGE AND/OR NONUSE • The gas must be turned off at the liquid propane cylinder when the Weber through gas barbecue is not in use. • LP cylinder must be stored outdoors in a well-ventilated area out of reach of children.

  • Page 4: General Instructions

    These parts may be gas carrying or gas burning components. Please contact Weber-Stephen Products Co., Customer Service Department for genuine Weber-Stephen Products Co. replacement part(s) information. WARNING: Do not attempt to make any repair to gas carrying or gas burning components without contacting Weber-Stephen Products Co., Customer...

  • Page 5: Gas Instructions

    DANGER NEVER store a spare LP Cylinder under or near this barbecue. NEVER fi ll the tank beyond 80% full. Your Weber ® gas grill is equipped for a cylinder supply system designed for vapor withdrawal. WARNING: Only use this grill outdoors in a well- ventilated area.
  • Page 6 You will need: LP cylinder, a soap and water solution and a rag or brush to apply it. Turn the LP cylinder so the opening of the valve is either to the front, side or rear of the Weber ® gas barbecue. Lift and hook the cylinder onto the fuel gauge.

  • Page 7: Remove Control Panel

    WARNING: The gas connections of your Summit gas grill have been factory tested. We do however recommend that you leak check all gas connections before operating your Summit REMOVE CONTROL PANEL Part required: Phillips Screwdriver. Remove the burner control knobs (1). The screws (2) need to be removed from the control panel (3) before the control panel is removed from the grill.
  • Page 8 Note - All factory-made connections have been thoroughly checked for gas leaks. The burners have been fl ame-tested. As a safety precaution however, you should recheck all fi ttings for leaks before using your Weber Gas Barbecue. Shipping and handling may loosen or damage a gas fi tting.
  • Page 9 WARNING: If there is a leak at connections (2, 3, or 4), turn OFF the gas. DO NOT OPERATE THE GRILL. Contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.

  • Page 10: Reinstall Control Panel

    REINSTALL CONTROL PANEL Parts required: control panel, screws, and burner control knobs. Place the control panel back onto the control panel brackets on either side of the front of the cooking box. Line up screws with screw holes on both the control panel and control panel brackets. Tighten screws.

  • Page 11: Refilling The Liquid Propane Cylinder

    LIQUID PROPANE CYLINDER The liquid propane cylinder manufacturer is responsible for the materials, workmanship and performance of the tank. If the tank has a defect malfunc- tions, or you have a question regarding the tank, call the tank manufacturer’s customer service center. The phone number is on the warning decal, which is permanently attached to the tank.
  • Page 12 This vent should be free of dirt, grease, bugs etc. • The gas connections supplied with your Weber designed and tested to meet 100% CSA and ANSI requirements. WARNING: Replacement LP tanks must match the regulator connection supplied with this barbecue.

  • Page 13: Direct Cooking

    GRILLING METHODS NOTE: If grill looses heat while cooking refer to the troubleshooting section of this manual. You can adjust the Left and Right burners in each burner set as desired. The control settings are High (H), Medium (M), Low (L), or Off (O). If burners go out during cooking, turn off all burners and wait 5 minutes before relighting.

  • Page 14: Indirect Cooking

    INDIRECT COOKING The Indirect Method is similar to roasting, but with the added benefi ts of that grilled texture, fl avor, and appearance you can’t get from an oven. To set up for Indirect cooking, gas burners are lit on either side of the food but not directly beneath it.
  • Page 15 If the hose is found to be damaged in any way, do not use the barbecue. ® Replace using only Weber authorized replacement hose. Contact the Customer Service Representative in your area using the contact information on our web site.

  • Page 16: Manual Lighting

    MANUAL LIGHTING DANGER Failure to open the lid while igniting the barbecue’s burners, or not waiting 5 minutes to allow the gas to clear if the barbecue does not light, may result in an explosive fl ame-up which can cause serious bodily injury or death.

  • Page 17: Using The Smoker

    USING THE SMOKER The smoker uses presoaked wood chips. For best results with faster cooking foods like steaks, burgers and chops, etc., we recommend using fi ner wood chips because they ignite and create smoke faster. For longer cooking foods such as roasts, chicken and turkeys, etc., we recommend using larger wood chunks because they ignite slowly and provide smoke for a longer period of time.

  • Page 18: Lighting The Smoker Burner

    WARNING: Check hose before each use of grill for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way, do not use the grill. Replace using only Weber ® authorized replacement hose. Contact the Customer Service Representative in your area using the contact information on our web site.

  • Page 19: Manually Lighting The Smoker Burner

    WARNING: Check hose before each use of grill for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way, do not use the grill. Replace using only Weber ® authorized replacement hose. Contact the Customer Service Representative in your area using the contact information on our web site.

  • Page 20: Rotisserie Assembly

    ROTISSERIE ASSEMBLY Parts required: rotisserie motor bracket(1), rotisserie motor(1), rotisserie shaft(1), spit forks(4) and fork screws (4). Install the motor bracket Attach the stainless steel motor bracket to the left side of the cooking box, using the 1/4-20 fasteners and the 1/4-20 Keps nuts. Attach the motor.

  • Page 21: Using The Rotisserie

    USING THE ROTISSERIE Note - Before using your rotisserie, measure your food at the widest point. If it exceeds 9 1/2” (241.8mm), it is too large to fi t the rotisserie. If it is too large, food can be prepared using a roast holder and the Indirect Cooking Method. IMPORTANT SAFEGUARDS WARNINGS •...

  • Page 22: Lighting The Rotisserie Burner

    If the hose is found to be damaged in any way, do not use the grill. Replace ® using only a Weber authorized replacement hose. Contact the Customer Service Representative in your area using the contact information on our web site. Log ®...

  • Page 23: Manually Lighting The Rotisserie Burner

    Push rotisserie burner control knob down and turn to START/HI. Continue to hold the control knob down. Continue to the next lighting step. Push and hold down the Igniter button until burner ignites. You will hear the igniter sparking. Continue to hold the control knob down until twenty (20) seconds after the burner has ignited.
  • Page 24 WARNING: Check hose before each use of grill for nicks, cracking, abrasions or cuts. If the hose is found to be damaged in any way, do not use the grill. Replace using only a Weber ® authorized replacement hose. Contact the Customer Service Representative in your area using the contact information on our web site.
  • Page 25 (Resembles paint peeling.) If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com CHECK Inspect Spider / Insect Screens for possible obstructions.

  • Page 26: Rotisserie Troubleshooting

    If problems cannot be corrected by using these methods, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com CHECK Try to relight burner by holding burner control knob down and continue holding down until 20 seconds after burner has ignited.

  • Page 27: Maintenance

    If the spider/insect screen becomes damaged or cannot be cleaned, please contact the Customer Service Representative in your area using the contact information on our web site. Log onto www.weber.com MAIN BURNER FLAME PATTERN ®...
  • Page 28 REPLACE MAIN BURNERS Your Summit ® gas grill must be OFF and cool. Turn gas OFF at source. Disconnect regulator. Remove cooking grates. Remove Smoker box. Remove Flavorizer ® bars. To remove control panel refer to “Remove the control panel” under “Check for Gas Leaks.” Disconnect all ignition wires from the Ignition Module.
  • Page 29 Disconnect the Thermocouple from the IR Burner valve. MAINTENANCE Remove screws from the manifold assembly: (a) Locate the screws on both sides of the manifold frame. (b) Remove the screws from manifold frame. 29 29...
  • Page 30 Pull manifold assembly out from the manifold frame. MAINTENANCE Lift and twist the burner assembly slightly, to separate the Crossover tube (a) from the burners (b). Remove the Crossover Pull the selected burner(s) tube(s) from manifold frame and replace with a new burner tube. ®...

  • Page 31: Ignition System Operations

    To reinstall the manifold assembly, reverse steps 7 through 14. CAUTION: The burner openings (1) must be positioned properly over the valve orifi ces (2). Check proper assembly before fastening manifold in place. WARNING: After reinstalling the gas lines, they should be leak checked with a soap and water solution before using the grill.
  • Page 32 ©2005- The following trademarks are registered in the name of Weber-Stephen Products Co., an Illinois corporation, located at 200 East Daniels Road, Palatine, Illinois 60067 U.S.A. Australia; Smokey Joe, Weber, Kettle Silhouette Grill Confi guration, Botswana; Weber, Canada; Smokey Joe, Genesis, China; Kettle Silhouette France;...

This manual is also suitable for:

Summit platinum d4Summit platinum d6

Table of Contents