Cocraft Pro Edition JT18-P Original Instructions Manual page 5

e) Maintain power tools. Check for misalignment or binding of moving parts,
breakage of parts and any other condition that may affect the power tool's
operation. If damaged, have the power tool repaired before use.
Many accidents are caused by poorly maintained power tools.
f) Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp
cutting edges are less likely to bind and are easier to control.
g) Use the power tool, accessories and tool bits, etc. in accordance with these
instructions, taking into account the working conditions and the work to be
performed. Use of the power tool for operations different from those intended
could result in a hazardous situation.
5) Battery tool use and care
a) Recharge only with the charger specified by the manufacturer. A charger that
is suitable for one type of battery pack may create a risk of fire when used with
another battery pack.
b) Use power tools only with specifically designated battery packs. Use of any
other battery packs may create a risk of injury and fire.
c) When battery pack is not in use, keep it away from other metal objects, like
paper clips, coins, keys, nails, screws or other small metal objects, that can
make a connection from one terminal to another. Shorting the battery terminals
together may cause burns or a fire.
d) Under abusive conditions, liquid may be ejected from the battery; avoid
contact. If contact accidentally occurs, flush with water. If liquid contacts
eyes, additional seek medical help. Liquid ejected from the battery may cause
irritation or burns.
6) Service
a) Have your power tool serviced by a qualified repair person using only identical
replacement parts. This will ensure that the safety of the power tool is maintained.
Specific safety instructions for jigsaws
Warning: Always remove the battery from the jigsaw before performing any adjustment,
service or maintenance.
1. Hold the jigsaw by its isolated gripping surfaces whenever there is a risk of
the saw blade coming into contact with hidden live wires or its own power flex.
If the saw blade comes into contact with live wires it may electrify the metal parts
of the jigsaw which can give the user an electric shock.
2. Keep your hands away from the blade and other moving parts.
3. Do not reach under the workpiece being sawn. Be extra careful if the blade or your
hand is out of sight. Make sure that the underside of the workpiece is free of obstacles.
5