Weber 600 Step-By-Step Manual page 11

CHECK FOR GAS LEAKS
(CONTINUED)
a) Hose to quick disconnect connection. Figure 21 (a).
b) Hose to regulator connection. Gasline to regulator
fitting. Figure 21 (b).
WARNING: If there is a leak at connections
20 (a), 20 (b), 20 (c), 21 (a), or 21 (b) turn OFF the gas.
Do not operate the barbecue. Contact your dealer.
When leak checks are complete, turn gas supply OFF at
the source and rinse connections with water.
Summit 400
b)
Summit 600
a)
Figure 21
REINSTALL FRONT
PANEL
You will need: control panel, front panel, and four burner
control knobs.
With the Weber logo to the left, slide front panel down
into place. Figure 22.
11
Figure 22