Check For Gas Leaks - Weber 600 Step-By-Step Manual

CHECK FOR GAS LEAKS

This gas connections of your Weber Gas
Barbecue have been factory tested. We do
however recommend that you leak check all
gas connections before operating your
Weber Gas Barbecue.
Remove control panel and front panel
Take off all 4 (Summit 400) or 6 (Summit 600) burner
control knobs.
Pull up on the ignition buttons until they stay in the up
position. Figure 16.
Burner control knobs
Ignition button
The control panel is separate from the front panel. The
control panel needs to be removed before the front panel
can be removed. Figure 17.
Control
panel
Front
panel
WARNING
Figure 16
Figure 17
Put your fingers under the front edge of the control panel
and lift up and pull evenly toward you. Figure 18 (a).
Front edge of the
control panel
(a)
Pull the front panel up and out of the cooking box
assembly. Figure 19.
Front panel
9
Front Panel
Control Panel
Figure 18
Figure 19