Charging Instruction - UDI R/C U64 User Manual

Motorboat parts installation
①
Slider drone doll installation
Installation: Make sure distinguish the doll's front and rear soles, put into the front
toes and then press down the rear foot is fine.
Disassembly: Lift the rear foot and then pull
out is fine.
Rear
Front
②
②

Charging Instruction

Battery power is insufficient in the original plant. It must be charged saturated
before it can be used.
Connect the original charging cable with the drone, and then connect other USB
charging port. The drone red charging-LED keeps bright when charging and the light
turns green when fully charged.
The drone power button should be
turned off when charging.
▲ Only use the original charging cable;
suggest select adapters with output
current of 5V 2A .
USB adapter
(Not included)
①
②
Front
②
Distinguish front and rear of the
motorboat, install the front and
rear guards, and put the hands
to the front guard, finally put on
the doll's handle.
②
Original charging cable
4
Protection rack installation
Charging port
①
②
Rear